Colaplex BASF glue
Colaplex BASF glue is a very fluid glue indicated for joining methacrylate (PMMA) for extrusion and casting.
- Fluid liquid.
- Color: colorless to slightly yellow.
- Boiling point 47 ° C.
- Flash point 58ºC.
- Vapor pressure: 374,68 mmHg.
- CLP CLASSIFICATION (Regulation 1272/2008).
H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May irritate the respiratory tract.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H373 May cause liver and blood damage through prolonged or repeated exposure if swallowed.
ADR: UN 1133, ADHESIVES, 3, GE III, (D / E)
IMDG: UN 1133, ADHESIVES, 3, GE / E III (58ºC
SAFETY AND STORAGE TIPS:
Store the containers between 5 and 25 ° C, in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Once the containers are opened, they must be carefully resealed and placed vertically to avoid spillage. Store in the original container.
For bonding and bonding extrusion and casting polymethylmethacrylate (PMMA) materials.
The parts to be treated must be free of tension, thus avoiding microcracks due to the action of the solvent.
Tests can also be carried out for gluing other plastic materials.
Application: with a small bottle or syringe fitted with a cannula or needle on the edges of
the pieces to be joined in the finished position. The bonding is by capillarity, the product flowing
between planes quickly and progressively.
Before final gluing: carry out as many tests as necessary to
check that the behavior of the pieces to be joined corresponds to the result
wanted. To avoid the formation of bubbles, the pieces to be joined must be completely free
of impurities and with perfect planimetry. Exert adequate pressure during gluing.
Recommended temperature for gluing: 20-24ºC; Dry place.
Adhesive bonding time: few minutes. Do not move the pieces joined by gluing
until after 2 hours.
Preferential consumption: 2 years from the date of packaging, according to the conditions of